6 min read · Updated
Key takeaways
- Slub yarn is spun with deliberate thick segments along its length. The unevenness is the product, not a defect.
- Slubs are made on a ring frame with a slub attachment that varies the draft on a programmed pattern.
- Three settings define the look: slub length, slub thickness against the base yarn, and the gap between slubs.
- Polyester slub holds its texture through laundering; cotton slub gives a softer, natural handle against the skin.
- Order by count, blend, slub length, thickness, frequency, and approve a sample before bulk.
Slub yarn is yarn spun with deliberate thick-and-thin variation along its length. The thicker segments are the slubs, and they give the finished fabric an uneven, textured, hand-made look instead of the flat uniformity of an ordinary yarn.
The word causes confusion because in ordinary spinning a slub is a fault: an unintended thick place that a yarn clearer tries to remove. Slub yarn turns that around. The thick places are made on purpose, to a pattern, and the buyer specifies them.
How slubs are made
Most slub yarn is spun on a ring frame fitted with a slub attachment. In normal spinning the drafting rollers pull the fibre strand out to a steady thickness. The attachment interrupts that steady draft on a programmed schedule, so that for a short stretch more fibre is allowed through. That stretch becomes a slub. Then the draft returns to normal and the base yarn continues until the next slub.
Because the pattern is programmed, it can be repeated reliably. That is what separates slub yarn from a yarn that is simply uneven. Some mills also use other methods, such as injecting extra fibre or feeding a second strand, so the exact mechanism varies by mill.
The core slub parameters
Three settings decide how the yarn looks, and each can be changed independently of the base count.
| Parameter | What it controls | Effect on the fabric |
|---|---|---|
| Slub length | How long each thick segment runs | Short slubs read as flecks; long slubs read as streaks or bars |
| Slub thickness | How much thicker the slub is than the base yarn, often given as a multiple | Low thickness gives a subtle texture; high thickness gives a pronounced, irregular surface |
| Gap (pause) length | The stretch of normal yarn between slubs | Short gaps look busy and dense; long gaps look sparse and clean |
The same count can therefore give anything from a barely visible texture to a strongly irregular one. Slub patterns can also be varied rather than perfectly regular, which makes the repeat harder to see in the fabric.
Polyester slub vs cotton slub
The slub effect is mechanical, so it can be made in either fibre. The choice is about what the fabric has to do after it is sold.
- Polyester slub keeps its texture through repeated laundering and hard wear, because polyester resists shrinkage and flattening. It suits linen-look woven shirting, upholstery, curtains and home textiles.
- Cotton slub is the choice next to the skin, where breathability and a natural handle matter more. It gives casual tees and jersey a lived-in surface, and it can be carded or combed depending on the grade of fabric.
- Blends such as PC and CVC slub sit between the two. See PC vs CVC yarn for how those blends behave.
Where slub yarn is used
- Knits: casual T-shirts, jersey and knitwear, where slub gives a vintage, lived-in surface.
- Wovens: linen-look shirting and denim, where the slub imitates the natural irregularity of linen or gives the fabric a worn character.
- Home and furnishing: upholstery, curtains and other home textiles.
How to specify a slub yarn order
A spinner cannot quote a slub yarn from a description such as "nice texture". These are the details that matter:
- Count and construction: the base count in Ne, and whether it is single or plied. If the notation is unfamiliar, see yarn count Ne explained.
- Fibre and blend: 100% polyester, cotton, or a blend, and for cotton whether carded or combed. The combed vs carded guide covers that choice.
- Slub length, thickness and gap: the three parameters above, as numbers if you have them.
- Dyeing: raw white, or cone dyed if you need dyed yarn.
- A reference: a swatch or an existing fabric is far more reliable than describing the effect in words.
- Sample approval: approve a sample before bulk, since slub character is judged by eye in the fabric.
Perception Impex sources slub yarn to specification from mills in its network. Our slub yarn page lists the polyester, blended and cotton constructions, and the wider specialty yarn range covers other effect yarns.
