Skip to content
Perception Impex globe emblemPERCEPTIONImpex

Fabric Basics

What Is PC Fabric? PC Meaning, Blend Ratios and Uses

PC stands for polyester-cotton, a blend in which polyester is the majority fibre. Here is what the name means, which ratios are common and what each is used for.

6 min read · Updated

Key takeaways

  • **PC means polyester-cotton.** In trade use it names the blend where polyester is the majority, commonly 65/35 or 52/48 polyester to cotton.
  • **CVC is the opposite balance:** cotton leads. The same two numbers describe different fabrics, so always write the fibres out.
  • PC yarn is the spun blended yarn; PC fabric is what is knitted or woven from it. Both are called PC.
  • More polyester means better shape retention, faster drying and lower cost; more cotton means a softer, more breathable handle.
  • The two fibres take different dye classes, so PC is usually dyed in two stages and shade matching needs care.

PC fabric is a polyester-cotton blend in which polyester is the majority fibre, for example 65 percent polyester to 35 percent cotton, or roughly 52/48. The full form is simply polyester-cotton. When cotton is the majority instead, the blend is called CVC, short for Chief Value Cotton.

PC full form and other names

PC stands for polyester-cotton, and searches for "pc cotton full form" or "pc fabric meaning" lead to the same answer. You will also see "poly-cotton" and "polycotton". In some markets the same blend is sold as TC, from Tetoron cotton, Tetoron being an older brand name for polyester. The naming varies by region, so confirm the fibre percentages rather than relying on the letters.

PC yarn versus PC fabric

PC yarn is the spun yarn made by blending polyester and cotton staple fibre. PC fabric is the cloth knitted or woven from that yarn. A mill buying PC yarn is choosing the blend and count; a garment maker buying PC fabric is choosing the construction as well. Some fabrics are also made by combining separate polyester and cotton yarns, so the label alone does not tell you which route was used.

Common PC blend ratios

Ratio (polyester / cotton)What it changesTypical use
65 / 35The most common PC blend. Strong shape retention, low shrinkage, quick drying.Uniforms, workwear, fleece, activewear
52 / 48Closer to an even split. More cotton feel and absorbency, still stable in wash.Shirting, school and corporate wear, polos
80 / 20 and aboveBehaves mostly like polyester: very durable, dries fast, less breathable.Heavy-duty workwear, sportswear
Typical patterns only. Actual behaviour depends on count, construction and finishing.

Knits and wovens

In knits, PC is used for single jersey, pique, fleece and PC sinker, a fine, flat sinker-top jersey commonly used for tees and uniform polos. Pique gives polos their textured surface. In wovens, PC is the staple of workwear, uniforms and shirting, where it resists creasing and survives frequent industrial laundering.

Care, shrinkage, pilling and dyeing

  • Shrinkage. Polyester does not shrink in the wash, so PC shrinks less than pure cotton. Residual shrinkage comes from the cotton share and the finishing.
  • Pilling. Strong polyester fibres hold pills on the surface instead of shedding them, so a high-polyester fabric can look pilled even when it is structurally sound.
  • Drying and care. Polyester dries quickly and holds creases less. Wash and iron at moderate temperatures, since high heat can affect polyester.
  • Dyeing. Polyester is dyed with disperse dyes at high temperature and cotton with reactive or similar dyes, so PC is usually dyed in two stages. Shade matching across lots needs care; approve a lab dip on the exact blend.

How to specify PC

Write the fibres out with their percentages, for example "65% polyester / 35% cotton", then add the count, carded or combed quality and the end use. Never give bare numbers. For the side-by-side comparison with the cotton-rich blend, see PC vs CVC yarn. To source the yarn, see our PC yarn range.

FAQ

Related questions

What is PC fabric?

PC fabric is a polyester-cotton blend in which polyester is the majority fibre, commonly 65 percent polyester to 35 percent cotton. It holds its shape, dries quickly and resists shrinkage, which is why it is widely used for uniforms and workwear.

What is the full form of PC in fabric?

PC stands for polyester-cotton. It names the two fibres, and in trade use it means the polyester-dominant blend. In some markets the same blend is called TC, from Tetoron cotton.

What is the difference between PC and CVC fabric?

Both blend polyester and cotton. In PC, polyester is the majority; in CVC (Chief Value Cotton), cotton is the majority. PC is more durable and dries faster, while CVC feels softer and more breathable.

What is a typical PC fabric composition?

The most common composition is 65 percent polyester and 35 percent cotton. Ratios such as 52/48 are also used where more cotton feel is wanted. Always check the stated percentages, as conventions vary.

Why is PC fabric dyed in two stages?

Polyester and cotton accept different dye classes. Polyester takes disperse dye at high temperature, while cotton takes dyes such as reactive dyes, so the two fibres are usually dyed separately to get an even shade.

Have a yarn requirement to discuss?

Share your count, quantity, and quality. We respond with availability and competitive pricing, Mon to Sat.

Request a Quote